X-ray diagnostic system RAD ECLYPSE, ARCOM (Italy)
The ECLYPSE X-ray complex (manufactured by Arcom International, SRL, Italy) in terms of its functionality is considered an X-ray diagnostic complex for two workstations and allows for the full range of radiographic examinations.
- 1st place – bucky table (AIN or UPPER);
- 2nd place – X-ray vertical bucky stand.
The devices allow you to conduct research both on an X-ray cassette with film and use a flat panel portable detector for digital photographs.
This system is completed Dose Area Product Measuring System VacuDAP and Ionization Chambers AEC Sensor, the use of which is mandatory according to Article 17 of the Law of Ukraine «On the protection of humans from the impact of ionizing radiation».
Complete set of the X-ray diagnostic system ECLYPSE for two workplaces:
1.1. AIN Standard Bucky Table
AIN Standard Bucky Table with a fixed tabletop height.
Or:
1.2. UPPER – Elevating Bucky Table
UPPER Elevating Bucky Table with adjustable tabletop height.
The adjustable height of the UPPER table deck facilitates access to the staff table and is recommended for the diagnosis of patients with limited mobility, the elderly, children and patients with severe injuries.
2. ETS Tubestand
ETS Tubestand is a vertical stand of images that holds an x-ray source for radiographic examinations, mounts on floor rails and comes complete with
Collimator Optica-20 (Varex USA) or R-302A (Ralco Italy)
3. DTR vertical bucky stand
DTR vertical bucky stand – X-ray device for clinical diagnosis of patients in a vertical (standing) or horizontal position (lying on their stomach).
Supplied with bracket for digital (or analogue) detector.
4. X-ray power device
Depending on the customer’s technical specifications, the following X-ray generators can be equipped:
- Generators ODEL s.r.l. (Italy):
Endeavour 40R type R306.35, 40kW;
Endeavour 50R type R306.35, 50kW;
Endeavour 65R type R306.36, 65kW;
Endeavour 80R type R306.37, 80kW; - Generators with capacitor storage ODEL s.r.l. (Italy):
NEBULA type R212.12, 32 kW;
NEBULA type R212.13, 40 kW;
NEBULA type R212.14, 50kW; - Generators CPI (Canada) SMR200, power 32 kW, 40 kW, 50 kW (optional);
- Generators CPI (Canada) CMP200DR, power 32 kW, 40 kW, 50 kW, 65 kW, 80 kW (optional);
- Generators with capacitor storage CPI (Canada), CMP200EA, power 32 kW, 40 kW, 50 kW (optional).
The device is standardly equipped with Endeavor 50R type R306.35, 50kW or NEBULA type R212.14, 50kW.
5. X-ray emitter
Depending on the power of the X-ray generator and the customer’s technical specifications, it is possible to equip it with the following X-ray emitters (X-ray tubes):
- X-ray emitter E 7252X (Canon, Japan)
- X-ray tube RTM782, RTM90, X42, X76 IAE (Italy)
- X-ray emitter RAD-14.
6. Digital flat panel X-ray detector
Equipped with a digital flat panel X-ray detector EVS (DRTECH, South Korea) with original E-console1 software.
Advanced Image Reconstruction System – DRTECH’s patented TRUVIEW®ART image processing system, thanks to reverse filtering technology, provides increased image contrast and improved ability to detect micro abnormalities in the lungs, chest and heart.
It is possible to use flat panel detectors of the Exprimer series:
- with wireless connection (removable battery) – EVS 4343W / EVS 4343WG / EVS 3643W /
EVS 3643WG; - with wired connection – EVS 4343A / EVS 4343AG / EVS 3643A / EVS 3643AG.
The quantity and model of digital flat panel X-ray detector are completed depending on the customer’s technical specifications.
7. X-ray Grids
The detector holders in the table and image rack are equipped with a built-in fixed high-density screening raster (grid) of at least 215 lines per inch, which prevents excessive vibrations of the digital flat panel detector. The raster is removable so you can take pictures without it.
8. Automated workstation for x-ray laboratory assistant
The laboratory assistant’s automated workstation (AWS) has the ability to control the generator, which provides additional convenience to the staff of the medical institution.
Can be equipped with additional monitors (clinical monitor JUSHA-CR22 or analogues) depending on the customer’s technical specifications.
9. Automated workstation for a radiologist
Automated workstation for
- specialized software – full compatibility with DICOM, ability to connect to PACS servers (including remote ones);
- monochrome medical diagnostic monitor
Jusha M260G , 21.3″ 2MP for X-rays; - medical DICOM printer for obtaining hard copies of X-ray images on a special X-ray film Drystar 5302 (AGFA, Belgium).
At the request of the customer or technical specifications, it can be equipped with a monochrome medical diagnostic monitor JUSHA-M350G (3 MP).
